Sangean DDR-63+ (V1) User Manual
Page 9
8
GB
.
.
.
.
.
.
.
Battery compartment
Latch
Retaining lugs (inside)
Remove the battery cover on the rear of your remote control by applying pressure to the
catch in the direction shown by the arrow in the diagram, and then lifting the cover.
Insert 2 x AAA size batteries into the compartment. Make sure the (+) and the (-) ends of the
batteries are positioned as shown inside the compartment.
Close the battery cover by inserting the retaining lugs first, then apply pressure to the free end
such that the catch latches the cover securely.
If the remote is not to be used for an extended period of time it is recommended that the
batteries are removed.
IMPORTANT:
The batteries should not be exposed to excessive heat such as sunshine, fire or the like. After use,
disposable batteries should if possible be taken to a suitable recycling centre. On no account should
batteries be disposed of by incineration.
Do not leave batteries within reach of young children. They can be a chocking hazard.
Remote control battery replacement