CANOGA PERKINS 9145EMP NID Software Version 4.0 - Manual (Page 168)

Service OAM 9145EMP NID Software User’s Manual
Maintenance End Points
153
receives CFM PDUs from, and transmits them towards, the direction of the wire. Press
Enter. The Port field is highlighted.
7. In the Port field, select USR1, USR2, USR3, USR4, or NET1. (The list of accessible ports
for the MEP will be dynamically filled depending on configuration of the appropriate MA/
MEG.)
8. To accept the new Maintenance End Point settings, type A and press Enter. The
Maintenance End Point Attributes screen (Figure 11-21 for 802.1ag or Figure 11-22 for
Y.1731) opens.
9. To modify an attribute value, type the number of the attribute and press Enter, or press
Esc to return to the Maintenance End Point List screen.
Figure 11-19 Create a New Maintenance End Point screen (for 802.1ag)
Canoga Perkins Corp. Ethernet Network Interface Device 02-JAN-2011
9145EMP-761-4-0 V40.43 Canoga 9145EMP 32 device 11:20:59
----------------------CREATE A NEW MAINTENANCE END POINT------------------------
1) MEG ID 1
MEP ID: 1
3) Admin Status: Enabled
4) Direction: Down
5) Port: NET1
Select [1-5] for attributes:
------------------------------------Messages-----------------------------------