CANOGA PERKINS 9145EMP NID Software Version 4.0 - Manual (Page 194)

Service OAM 9145EMP NID Software User’s Manual
AIS Configuration
179
2. To configure AIS notification, type E and press Enter. The current Maintenance
Evaluation Point is highlighted.
3. Press the Space bar to scroll through the list and highlight the entry you wish to configure.
4. When the MEP you want to modify is highlighted, press Enter. The AIS Server
Configuration screen for that MEP (Figure 11-48) opens.
5. To enable AIS notification, type 1 and press Enter. Select Enabled and press Enter.
6. To add a MEP client, type 2 and press Enter. You are prompted to enter the MEP client
MEG ID.
• Type the MEG ID and press Enter. You are prompted to enter a MEP client MEP
ID.
• Type the MEP ID and press Enter. The new MEP client appears on the screen.
7. To delete an existing MEP client, type 3 and press Enter. You are prompted to enter the
MEP client MEG ID.
• Type the MEG ID and press Enter. You are prompted to enter a MEP client MEP
ID.
• Type the MEP ID and press Enter. The MEP client is deleted from the screen.
8. To add a MIP client, type 4 and press Enter. You are prompted to enter the MIP client MIP
ID. Type the MIP ID and press Enter. The new MIP client appears on the screen.
9. To delete an existing MIP client, type 5 and press Enter. Type the MIP ID and press
Enter. The MIP client is deleted from the screen.
10. Type A to accept the settings and press Enter.
11. Press Esc to return to the SOAM AIS Configuration screen.
Canoga Perkins Corp. Ethernet Network Interface Device 02-JAN-2011
9145EMP-761-4-0 V40.43 Canoga 9145EMP 32 device 11:20:59
----------------------------SOAM AIS CONFIGURATION-----------Display 1 - 1 of 1-
MEP ID AIS Notification AIS Clients list
1 Disabled
Select [(F)irst, (P)rev, (N)ext, (L)ast] to change pages,
(E)dit, ESC to return:
------------------------------------Messages-----------------------------------