CANOGA PERKINS 9145EMP NID Software Version 4.0 - Manual (Page 205)

9145EMP NID Software User’s Manual Configuring EVC
EVC Configuration
190
from the C-VLAN translation table. To delete a record from the table, simply translate the
VLAN ID to itself by entering the same VLAN ID in the “New VLAN ID” field.
Press Esc to return to the Modify EVC Configuration Record screen.
Figure 12-7 C-VLAN ID Translation Table screen
12. To view or modify CVID to S-Tag PCP Mapping, type 10 and press Enter. The C-VLAN to
S-Tag PCP Map screen (Figure 12-8) opens. By default, all CVLAN IDs in the EVC record
map to the best effort PCP (0).
• To modify the mapping, type M and press Enter. You are prompted to enter a C-
VLAN ID in the range 1 -4094, or (U)ntagged, or (P)riority tagged. For each
CVLAN ID, enter the desired value of the S-Tag PCP.
• You can search for specific C-VLAN by ID number. See the Find instructions at
the bottom of your screen. Once a VLAN is selected, only the mapping corre-
sponding to this VLAN is displayed.
• Press Esc to return to the Modify EVC Configuration Record screen.
Canoga Perkins Corp. Ethernet Network Interface Device 21-MAR-2011
9145EMP-761-4-0 V40.43 Canoga 9145EMP 32 device 11:20:59
--------------------C-VLAN ID TRANSLATION TABLE --------Page 1 of 2 ----------
S-VLAN ID: 100 Port: USR2
User 2 <=> Network User 2 <=> Network User 2 <=> Network User 2 <=> Network
------------------ ------------------ ------------------ ------------------
20 <=> 20
21 <=> 21
22 <=> 22
23 <=> 223
24 <=> 224
25 <=> 225
Select [(1) Add/Delete/Modify C-VLAN Translation, (CTRL-D) Page Down,
(CTRL-U) Page Up, (CTRL-T) Toggle View from User/Network]
------------------------------------Messages-----------------------------------