CANOGA PERKINS 9145EMP NID Software Version 4.0 - Manual (Page 61)

9145EMP NID Software User’s Manual Diagnostics
Latency/Jitter Test
46
Local DSCP Rcvd This is the DSCP that was received at the end of the Round Trip.
Figure 4-3 Latency/Jitter Test screen
Type the number of the function you wish to change, and press Enter. Once the settings have
been entered, type 13 and press Enter to begin or end testing. Press Esc to return to the
Diagnostics menu.
Configuration items are as follows:
1. To IP Address The remote agent IP Address.
2. From IP Address The originating IP address that the 9145EMP will place into the test
packets. Press the Space bar to scroll through Auto Selection, Management IP, Test IP,
and Aux IP.
The Auto Selection setting will start first with the Test IP. If the To IP Address is in the Test
Network Subnet, the Test IP will be used in the packet. If the Test IP is not available or
the To IP Address is not in the Test Network Subnet, the Aux IP is checked. If the Aux IP
is not available or the To IP Address is not the Aux Network Subnet, the Manager IP is
used. Any address can be used with the Manager IP since it has access to the Default
Gateway.
If the From IP Address is specified as the Test IP or the Aux IP, and the To IP Address is
not located in the matching subnet, the destination is unreachable. An error message is
displayed when the Start Test command is given.
Canoga Perkins Corp. Ethernet Network Interface Device 29-JAN-2011
9145EMP-761-4-0 V40.43 Canoga 9145EMP 32 device 11:20:59
--------------------------------LATENCY/JITTER TEST----------------------------
Test IP Addr 10.10.12.1
Test VLAN IDs C/T/S 0 /0 /0 Round Trip Packets 0
Test Duration 00:00 Dropped Packets 0
Minimum Latency (ms) 0.000000 Minimum Jitter (ms) 0.000000
Average Latency (ms) 0.000000 Average Jitter (ms) 0.000000
Maximum Latency (ms) 0.000000 Maximum Jitter (ms) 0.000000
Far PBit Sent 0/Local Rcvd ? Local PBit Sent ?/Far Rcvd ?
Far DSCP Sent 0/Local Rcvd ? Local DSCP Sent ?/Far Rcvd ?
1) To IP Addr 10.10.12.1 5) Packet Timeout sec (1-10) 3
2) From IP Addr Aux IP 10.0.13.122 6) Packet Priority (0-7) 0
3) Test VLANs C/T/S 0 / 0 / 0 7) Packet DSCP Code (0-63) 0
4) Test Packets Per Sec 1 8) Packet DF Bit Clear
9) Test Duration min:sec (0=forever) 0
10) Min Test Payload Size (40 - 9950) 40
11) Max Test Payload Size (40 - 9950) 40
12) Start/Stop Test
Select [1-12]:
------------------------------------Messages-----------------------------------