Line data input, With input roller), See animation – Daiwa TANACOM BULL 750 User Manual

Page 12

Advertising
background image

10

Input Roller

Line data input

(with Input Roller)

You can also set the main line utilizing the Input Roller.

6

1

4

5

MAX

Levelwind Guide

Main line

Pin

Power lever

Input Roller

4.

Attach the Input Roller, sold separately, to the reel. You will

then hear a beep sound confirming that the reel enters then into

the Automatic Input mode.

Tighten the drag to give enough line tension in order to wind line

without slipping

1.

Run the line through the Level Wind Guide and tie it onto the

spool.

The Levelwind Threader, one of the accessories, makes this

process easier.

Make sure of tying the line onto the Thread Pin to avoid the line

slipping on the spool surface.

2.

Connect the battery to the reel.

3.

With the reelʼs power on and the display showing

0.0

,

press the

MODE BUTTON

for more than 5 seconds.

5.

Push the Power Lever forward to maximum and wind the line.

When the Power Lever is moved forward, number on the lower

rigth portion of the display changes into a tension indicator, and

number of the counter on the upper portion of the display

begins to increase.

Keep line tension between level “

5

” and “

7

” while winding the line.

6.

Continue line winding until the line touches the Input Roller.

When the line reaches the Input Roller, the latter begins to rotate

so that the winding may stop automatically.

2

OFF

3

4

-Note that the value of tension between 5 and 7 simply displays

an appropriate value with the power lever at MAX. When wound

at a low speed, the display shows that a high tension is applied,

so please be careful since it may cause trouble.

As line winding continues, the displayed number of the counter

increases.

Line data input

With lnput Roller

See animation

Advertising