Functional setting operation, Pickup speed setting), Attention – Daiwa TANACOM BULL 750 User Manual

Page 25

Advertising
background image

23

4.

Press the

MODE BUTTON

to go back to depth readout.

1

2

4

2.

Press

MODE BUTTON

again.

3.

Set speed with the power lever.

The output is set as the pre-set value of the power lever. (After

pre-setting, it memorizes the value of the last change.)

-The winding stops when you press the

PICKUP BUTTON

while

winding up with the power lever.

1.

Press

MODE BUTTON

.

3

MAX

OFF

Pickup speed preference

If the display is at display, then move the power lever

or press

RESET BUTTON

to show the display shown on the

right.

This display is the pickup setting display.

(Pre-set value is 15.)

Use

While the power lever is at MAX position,

pressing the

PICKUP BUTTON

makes the

motor run at the pre-set pickup speed.

Attention

1.

While the PICKUP

PICKUP BUTTON

is in use for winding, winding speed is not

displayed.

(the figure corresponds

to the case of setting to 5)

Functional setting operation

(5. Pickup speed setting)

Advertising