Daiwa TANACOM BULL 750 - Manual (Page 28)

26
Jigging master
You can choose the number of steps you wish for your jigging
pattern.
Master jigging (123) is the method in which the number of jigging
steps is selected automatically by the computer.
You can choose the length of the line wound up in one jig action.
(Depending upon the sinker, speed of winding, the jigging
length may overrun its setting slightly.)
The length can be set in increments of 50 cm between 0.5 and
10 m.
You can choose the jigging pattern, range, waiting time and length you require.
- Pressing the JIG/PICKUP BUTTON , starts jigging, with the display showing the indicator. (Pressing the
button once more cease jigging.) The power lever controls jigging speed.
- Shifting of jigging speed is done easily with the lever control.
- When a fish strikes during jigging, it turns off providing the power lever is turned to the OFF position. After that,
normal winding is done with the power lever.
- To show the jigging display, refer to page 18.
1. Jigging pattern
2. Jigging length
(Preference setting)
(Preference setting)
One-step jigging Two-step jigging Three-step jigging Master jigging
Functional setting operation
(7. Jigging)
A : 4 seconds stop
B : 0.4 seconds stop
A
A
A
B
B
B