Daiwa TANACOM BULL 750 - Manual (Page 20)

18
Functional setting operation
(1. Mode setting display)
1.There are many useful functions in the mode
2.While the mode setting display is on, operate the power lever to change it to a desired value, and
then press the MODE BUTTON to complete the procedure.
3
How to set the many functions available
1. Press the MODE BUTTON to choose a display.
Each press of the MODE BUTTON changes the display to the
next function.
Holding the MODE BUTTON down, rapidly scrolls through the
displays, quickly getting you back to the depth display.
At each mode setting display, the default setting can be
retained by pressing the RESET BUTTON .
While letting out or winding line, the MODE BUTTON cannot be
used to change settings.
Power lever
MODE
BUTTON
MODE
BUTTON
MODE
BUTTON
MODE
BUTTON
MODE
BUTTON
Jigging range Winding speed display
(Each display example is the default setting)
This is displayed when the MODE BUTTON (1) is set to pickup.
When it is set to jig, it displays the jigging pattern (2).
(It depends on the setting.)
Jig/pickup pattern Jigging pattern Jigging length
Pickup speed Jig waiting time
(Select the indicator
of either the measured
winding speed or the
inverse counter.)