Daiwa TANACOM BULL 750 - Manual (Page 24)

22
Line sending function
The spoolʼs motor assists in winding out the line.
1.
Press the MODE BUTTON to show the line sending speed
adjustment display. Default setting is zero (OFF).
Set the speed level with the power lever.
2. Press the MODE BUTTON three times to show 0.0 (depth
counter) to complete.
It shows lamp blinks.
While the reel is sending line with this function, its speed cannot
be changed.
OFF
(adjustment of
line furnishing)
(the figure corresponds
to the case of setting to 5)
Functional setting operation
(4. Line sending function)
- The line sending mechanism begins to work at a depth of 2.5 m
below the pre-set auto stop depth.
- When the clutch is on during line feeding, the motor runs, so be
careful that the spool is rotating to the winding direction.
- Speed of the line going out is adjusted with 32 speed levels
ranging between 0 and Hi. It is adjusted in the line sending
mode.