Daiwa TANACOM BULL 750 - Manual (Page 30)

28
Winding speed display
In the default setting, the lower area counter displays the winding speed.
The chumming timer display area shows the remaining time until
the auto stop is reached. (p. 29)
The inverse counter numbers can be changed to indicate winding
speed.
Rate of speed indicated is meters per minute (m/min).
4. Press the MODE BUTON 3 times (from the line feed output
setting display) to show the water depth on the display. At that
point, the depth counter always starts functioning.
2
1. Press MODE BUTTON to show speed indicator display.
is shown on the screen.
In the default setting, the inverse counter is OFF.
(Unit: m/minute)
2.
Turn it ON with the power lever.
3.
You can complete the setting by pressing the MODE BUTTON
to display the next (line feed output setting) display.
1
3
4
Example)
100 m/min
Functional setting operation
(8. Winding speed indicator)