Setting the tuner in the vtr (cont’d), Oh©-s – Panasonic NV-J45 Series User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Tuner in the VTR (Cont’d)
CLOCK PROG/
RECORDING TRACKING/V-LOCK TIMER REG VTR/TV
Oh©-s@-@
©-©•©
PRESET/ t_____________ a _
1
FINE/NORMAL BAND/AFC CUAR
NEXT
1*4
1-3
3-2
2.2
Blanking of Unoccupied Programme Position
\t\onsf~S’jC'f7n<}Je
1
Press the Preset/Fine/Norma! Button.
2
Press the Channel Up or Down Button to select a
programme position (channel) which you do not want
to tune to a TV station.
3
Press the Clear Button (“—” will be displayed in the
Programme Position Indication).
^
• Repeat steps 2 and 3 for any programme positions
on which no stations are to be tuned. Afterwards,
these programme positions will be skipped during
Up/Down selection of the programme position.
4
Press the Preset/Fine/Normal Button twice.
Cancelling the Clear Function (Blanking)
1
Press the Preset/Fine/Normal Button.
2
To cancel the blanking of a programme position,
select that programme position on the VTR and then
press the Clear Button.
3
Press the Preset/Fine/Normal Button twice.
How to Select the Programme Position (Channel) on
the Remote Controller
©
0
select channel
press button
1-9
respective channel
10
© - ► © - ► 0
2 0
© _ ► © _ » ©
11-99
for example 32
©_► 0 - » 0
If more than 5 seconds pass between the first, second and
third push, the channel will not be changed normally.
To select the “A1" programme position;
Press the Input Signal Selector.
To select the signals which are input via Audio Input
Socket and Video Input Socket, select the “A1 ’’
programme position.
(
11
)