Panasonic NV-J45 Series - Manual (Page 25)

Timer Recording (Confd)
TIMER RECORDING BY USING THE
REMOTE CONTROLLER
How to select the programme position (channel)
To select a figure between 1 and 9, press the numeric
button corresponding to the number.
To select a 2-digit figure, first press the button and
then press the two corresponding numeric buttons one after
the other within 5 seconds.
How to set the Date and the Starting & Ending Times for
Timer Recording
To select a figure between 0 and 9, first press the numeric
button “0” and then press the numeric button
corresponding to the number.
To select a 2-digit figure, press the two corresponding
numeric buttons one after the other.
15
©
0
0
©
30 © -► O
• The second button must be pressed within 5 seconds
after the first button,
• Before pressing the Next Button, confirm that the figure
that you have input is indicated in the proper decimal
position in the Display.
> After inputting the minute, confirm that the minutes are
indicated as a 2-digit figure, before pressing the Next
Button.
• If the Next Button is pressed while a figure is only
indicated in the tens digit, it will be treated as a
programming error and will not be accepted.
I However, when no further figure is input within 5 seconds
after inputting a single digit, this figure will move to the
units digit.
»When pressing the following buttons first, they will
immediately be input in the units digit.
For the date:
“4”-“8” Buttons
For the hour; ‘‘3"-“9" Buttons
For the minute; “6"-“9” Buttons
Example; When programming a timer recording for a
programme that will be broadcast on channel
position 4 on the 3rd of the month, from 7:02
to 7;30.
1
Press the Programme Button.
• Press the Tape Speed Selector Button until the
Indicator of the desired tape speed (“SP” or “LP”) is
lit in the Display.
ON
—xtiT—
SP
D
OFF
Press the Number Buttons to select the programme
position (channel) on which the TV programme will be
broadcast.
ON
= V -- -
o
OFF
SP
Press the Next Button.
Press the Number Buttons to set the date.
Press the Next Button.
Press the Number Buttons to select the hour of the
starting time of the TV programme.
Press the Next Button.
Press the Number Buttons to select the minute of the
starting time of the TV programme.
J
3
D
SP
ON OFF
< 25 )