Panasonic NV-J45 Series - Manual (Page 15)

Auto Operation
Convenient Automatic Playback Functions____________
The following convenient automatic playback operations
can be activated simply by pressing a single button on the
Remote Controller.
1 Repeat Playback
When the Repeat Button is pressed, the “R" Indication will
light up in the Multi-Function Display on the VTR and
playback will start. When the tape reaches the end of its
recorded portion, it will automatically be rewound to the
beginning and playback will then start again. This process
will be performed repeatedly.
The playback will continue until the VTR detects the
end of the video recording (no control signal for
more than 5 seconds). At this point, the tape will be
rewound to the beginning and the playback will be
repeated.
Beginning
of Tape
End of
Recorded Part
nr
Repeat Playback''
h------------------- i-i
PLAY
REW
To stop the Repeat Playback, press the Stop Button.
Note:
If a short tape portion is played back many times, the
tape may become damaged at that part.
Control signal Interruption
(at least 5 sec.)
•If the interruption of the control signal
is less than 5 seconds, the playback
will continue (no rewind from this point
and repeat).
2 Memory Playback
When the Memory Button is pressed while the VTR Is in
the Stop mode, the tape is then fast-forwarded or rewound
and it wilt be stopped at the tape counter position
“0:00.00”, and playback will then start from that position.
3 Sleep Playback
When the Sleep Button is pressed, playback will start. As
soon as the tape reaches its end, it will be automatically
rewound to the beginning, and the VTR will then turn itself
off.
4 Rewind Playback
When the Rewind Button is pressed, the tape will be
rewound. As soon as the beginning of the tape is reached,
playback will start automatically.
Auto Operation
Auto VTR On
When a cassette is inserted, the VTR turns itself on
automatically.
Auto Play
When inserting a video cassette which has the erasure
prevention tab removed, playback will start automatically.
Auto Rewind
When the tape reaches its end during recording (except
OTR and timer recording) or playback, it will automatically
be rewound to the beginning.
VTR-Off Eject
When the VTR is off, the inserted cassette can be ejected
simply by pressing the Eject Button, and VTR will
automatically turn itself off again.
Auto Head Cleaning Function
This VTR features a special function that automatically
removes tape particles and dust from the video heads to
ensure continuously superior picture quality. While the
Head Cleaning Function is working, some noise may be
reproduced. However, this is no malfunction.
(15)