Panasonic NV-J45 Series - Manual (Page 32)

Intro Scan Function
How the Intro Scan Function Works...
Tape is
Playback for about
10 seconds
The Intro Scan function plays back the first 10 seconds of
each programme (recorded with index signal) on a tape
one after another. This is convenient for quick checking
what programmes are on a tape, or to find the desired
instalment of a TV series you have recorded on a tape.
Intro Scan Operation
Performing Index Repeat Playback
PAUSE/STILL STOP STILL ADV
11)1 (( ■ )) fill»
REW/Q- -PLAY- - 0 /FF
INDEX o
Insert a video cassette.
(Put the VTR in the stop mode.)
Press the Index Button. The “S” Indicator lights up.
Press the Fast Forward ►►/Cue (3 Button.
(The Intro Scan starts.)
When the desired scene is reached, press the Play
Button (►). * •
•The Intro Scan function may not be activated for
the first programme recorded dose to the
beginning of the tape.
• The Intro Scan function may not be activated, if the
interval between programme starts is less than
5 minutes in the LP mode, or less than 3 minutes
in the SP mode.
^ Index Signal
Repeat Playback ——
PLAY
C
REW
1 Press the Index Button.
2
Press the Repeat Button. The “RS" Indicator lights up
and playback starts.
• When the next index signal is found, the tape will be
rewound. When the index signal, where the
playback is to start, is found, the playback will
restart. In this way, automatically repeated playback
can be performed for a tape portion as defined by
the number of index signals that are skipped.
3 To stop the Index Repeat playback, press the Stop
Button.
If Index Repeat playback is performed on a tape for
long periods of time, the picture quality may become
inferior.
<
32
)