Panasonic NV-J45 Series - Manual (Page 12)

Setting the Clock to the Present Time
CLOCK PROG/Baaa RECORDING TRACKING/V-LOCK
OhOH©-
PRFSFT/ 1
O ©
©—©—
0-
FINE/NORMAL BA’ND/AFC CLEAR NEXT
For Example: Set the clock for Sunday, October 10,
___________ 1999, 9:10.___________________
• Connect the VTR to the mains outlet.
• Press the VTR On/Off Switch to turn the VTR On.
1
When connecting this VTR to the mains or after a
long power failure, the indications flash.
i i • : ; ! s ^
2
Press the Clock Button to start the date and time
setting.
SA
> t I : : r-
3
Press the or Button to set the year.
FR
^ z : :
4 Press the Next Button.
5 Press the "+” o r B u t t o n to set the month.
FR
-! !
7
Press the or Button to set the date.
^ su
^ i i i ^ ; I ■ J J
__ _____________________ !£
8 Press the Next Button,
9
Press the “+” or Button to set the hour.
r
10 Press the Next Button.
11 Press the “+” or Button to set the minute.
r
12 Press the Clock Button when the present time
becomes exactly 9:10'00".
su
:
At every push of the Next Button, the flashing indication
changes in the following order.
YEAR^MONTH^DATE^HOUR-^MINUTE
• In case of a power failure, the timer back-up
system maintains the clock operation and timer
content for at least 60 minutes. However,
depending on the charging time and the memory
content, the back-up time may be considerably
longer. However, it takes more than 60 minutes for
the back-up circuit to become operational, after the
VTR is connected to the mains.
•The Timer Record Function should be set to “Off”,
otherwise the VTR cannot be operated normally. In
this case, the Timer Record Indicator “Hi” will flash
to warn you.
• During date setting, the corresponding day is
simultaneously set.
• The clock/timer of the VTR is programmed with the
calendar up to the end of the year 2087.
The indications 88-99 are for the years 1988-1999.
The indications 00-87 are for the years 2000-2087.
6 Press the Next Button.
(
12
)