How to prepare to be polled, How to poll, How to prepare to be polled — how to poll – Panasonic Panafax UF-160 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How to Prepare to be Polled
In order to let other stations poll your machine, you must set your machine with a
document on the ADF. Be sure to set the polling password (see page 53) before setting
the document on the ADF. After being polled, your machine will automatically return
to the preset setting.
1
Place a document face down on the ADF.
Adjust left and right Document Guides.
DOCUMENT SET
Document Guide
- WOOE
*
crz3\
------- )
&
}
----- ^ or )-------^ repeatedly.
В
You are now set for POLLED = ON. If you
press
I
SELECT ] again, the setting
will return to POLLED = OFF.
DOCUMENT SET
P O L L E O = O F F
DOCUMENT SET
P O L L E D = O N
NOTC
You can still receive ordinary transmissions even when set to be polled.
54
How to Poll
The following procedure lets you poll one station, or up to 73 stations (70 One-Touch
or ABBR. stations, and 3 Direct Dialing stations). Multistation polling does not require
a Relay Station. Be sure to set the polling password before polling (see page 53).
NOTC
P O L L I N G
ENTER S T A T t O N ( S )
and
Dial by pressing a One-Touch key,
I
ABBR
I
and two digits, or [TEL/DIAL|
and a full number.
P O L L I N G
[ 3 5 ] ( S t a t i o n n a m e )
Ex: 1 ABBR
I
and
g] [^
, or
1.TEL/DI ALIE Ш Ш B] Ш Ш Ц]
To add more stations, use One-Touch
keys, or [ A B B R I and two digits.
Ex: One-Touch key 1 1 5 1
START
o r
P O L L I N G
7 7 7 2 3 4 5 |
P O L L I N G
[ 1 5 ] ( S t a t i o n n a m e )
* D I A L I N G +
[ 1 5 ] ( S t a t i o n n a m e )
1. To erase or change stations set in Steps 2 or 3, press j CLEAR |. If you recorded
several, use MODE | — | or j + | to find the station you want. Then press
I CLEAR I. Add new stations with One-Touch keys, or | ABBR 1 and two digits.
2. If a polled station is busy, or does not answer, it will be skipped and the next station
will be polled. The skipped station(s) will be redialed up to twice after all registered
stations have been polled.
3. When polling ends, a Multistation Communication Journal is automatically printed out.
This journal lists the stations polled and indicates whether polling was successful or not.
55
t