Panasonic Panafax UF-160 - Manual (Page 32)

E
Г
TIMER CONTROLLED
COMMUNICATIONS
You can send a document to one or more stations at any fixed time within 24 hours,
Built-in timers, one for Deferred Transmission and other for Deferred Polling, make
this timer communication possible. Note that you cannot set more than one Deferred
Transmission and one Deferred Polling (see page 60). However, you can set Deferred
Transmission and Deferred Polling at the same time, as long as they start
independently at different times.
Deferred Transmission
60
Place a document face down on the ADF,
Adjust left and right Document Guides.
DOCUMENT SET
and
DEFERRED COMM. N O . = |
1 ; X M T 2 : P O L L I N G
S T A R T T I M E
4
Select 1. XMT.
Enter start time from keypad.
(Use four-digit, 24-hour clock.)
Ex: Hi!]® mo 1:30 p.m.)
Dial by pressing a One-Touch key, or
IABBR i and two digits.
Ex: One-Touch key
S T A R T T I M E 2 3 : 3 0
ENTER S T A T I O N ( S ) |
S T A R T T I M E 2 3 : 3 0
[ 0 2 ] ( S t a t i o n n a m e ) |
START
0 1 - D E C - 1 9 9 0 1 5 : 0 0
The standby display and Deferred XMT
display
will flash alternately until
transmission actually takes place.
DEFERRED XMT 2 3 : 3 0
I 0 2 ] ( S t a t i o n n a m e )
NOT€
1. If you enter a wrong number in Step 4, press | CLEAR [, then reenter the right
number.
2. You cannot use Direct dialing in Step 5. All called stations for Timer Controlled
Communications must be set in advance in One-Touch/ABBR. keys.
3. When Timer Controlled Communication is set, you can still send, poll, or copy
documents. To send, poll, or copy, simply follow the normal procedure,
4. You cannot use SET MODE functions when Timer Controlled Communication is set.
5. To cancel or change the settings, see page 63.
61