Hinging the right side panel – Steffes 2106 Owner & Installers Manual User Manual

Page 26

Advertising
background image

Appendix A.08

2100 Series

HIngIng THe rIgHT SIDe PAnel

For ease in servicing, the right side panel of the 2100 Series room heating unit hinges open. Follow the instruc-

tions below to hinge the right side panel:

1. With the painted front panel off, remove the screw

located above the grill slats on the lower right side

of the heater.

2. Loosen the screw located at the top right corner of

the electrical compartment.

3. Push out on the right side panel.

Advertising