Steffes 9180 - Manual (Page 2)

For Customer Use
Please record your model and serial number below. This number is found on the identification labels
located on the front of and inside the electrical panel. Retain this information for future reference.
Model No. ________________________________________________________________________
Serial No. ________________________________________________________________________
RECOGNIZE THESE SYMBOLS AS SAFETY PRECAUTIONS
It is important, both for your personal safety and to avoid possible damage to the
equipment and your property, that you observe the safety instructions given follow-
ing these symbols.
 The equipment described herein is intended for installation by a qualified
technician in accordance with applicable local, state, and national codes and
requirements.
 To insure proper installation and operation of this product, completely read
all instructions prior to attempting to assemble, install, operate, maintain or
repair this product. Upon unpacking of the system, inspect all parts for dam-
age prior to installation and start-up.
 This manual should be retained by the owner upon completion of the installa-
tion and made available to service personnel as required.
 Disclaimer: In compiling this manual, Steffes Corporation has used its best
judgement based upon information available, but disclaims any responsibility
or liability for any errors or miscalculations contained herein, or any revisions
hereof, or which result, in whole or in part, from the use of this manual or any
revisions hereof.
IMPORTANT