BUCHI Melting Point M-565 - Manual (Page 51)

7 Maintenance
51 Melting Point M-565 Operation Manual, Version D
7 .4 Cleaning the heating block
Remove broken capillaries from the heating block.
ATTENTION
• Wait for the heating block to cool down before touching it!
• Remove the cover.
• Follow the instructions mentioned below on the use of the cleaning tool 051978.
• If a melting point capillary is broken and is stuck
in the heating block, use the cleaning tool
(Order number: 051978).
• Remove the cover and glass holder with glass
window.
• If glass parts of a melting point capillary are
stuck in a hole of the metal heating block, use
the cleaning tool as shown in the picture.