Kistler-Morse KM Microcell Bolt-On - Manual (Page 40)

APPENDIX D. SPARE PARTS RECOMMENDATIONS
Kistler-Morse ® recommends the purchase and
maintainance of the following minimum number of
spare parts/tools for the Microcell™ system:
1 Extra per Vessel
Microcell™ Sensor, each complete with:
Sensor
Environmental Cover
#8-32 socket head cap screws (2)
#8 hardened flat washers (2)
1 Extra per Plant
T-handle driver
Sikaflex 1A polyurethane sealant or Dow
Corning RTV 738 or RTV 739
Kistler-Morse ® Test Meter
CAUTION
Only use Sikaflex 1A polyurethane sealant
or Dow Corning RTV 738 or RTV 739. Other
sealants may contain acetic acid, which is
harmful to sensors and electronics.
36