Acura 2000 RL - Owner's Manual - Manual (Page 132)

Climate Control System
Recirculation Button
This button controls the source of
the air going into the system. When
the indicator above this button is lit,
air from the car's interior is sent
through the system again (Recircula-
tion mode). When the indicator is off,
air is brought in from outside the car
(Fresh Air mode).
You can, for example, manually put
the system in recirculation mode
when driving through an area of
smoke or fumes.
Fan Control Dial
You can manually select the fan
speed by turning the fan control dial.
When you turn the dial clockwise,
the fan is taken out of automatic
mode and starts to run at its lowest
speed. Turning the dial fully
clockwise increases the fan's speed,
which increases air flow.
FAN CONTROL DIAL MODE BUTTON
RECIRCULATION BUTTON
Mode Button
Use the MODE button to select the
vents the air flows from. Some air
will flow from the side vents and the
dashboard corner vents in all modes.
Each time you press the MODE
button, the display shows the mode
selected. Press the button four times
to see all the modes.
CONTINUED
Comfort and Convenience Features
Main Menu
Main Menu Table of Contents