Power steering, hood latch, air cleaner element – Acura 2000 RL - Owner's Manual User Manual

Page 232

Advertising
background image

Power Steering, Hood Latch, Air Cleaner Element

Always use Genuine Honda Power

Steering Fluid. If it is not available,

you may use another power steering
fluid as an emergency replacement.

However, continued use can cause
increased wear and poor steering in
cold weather. Have the power

steering system flushed and refilled

with Honda PSF as soon as possible.

A low power steering fluid level can

indicate a leak in the system. Check
the fluid level frequently and have
the system inspected as soon as
possible.

Turning the steering wheel to full left

or right lock and holding it there can
damage the power steering pump.

Hood Latch

Clean the hood latch assembly with a
mild cleaner, then lubricate it with a
multipurpose grease. Lubricate all
the moving parts (as shown),
including the pivot. Follow the time
and distance recommendations in

the Maintenance Schedule. If you
are not sure how to clean and grease
the latch, contact your Acura dealer.

Air Cleaner Element
The air cleaner element should be

cleaned or replaced according to the
time and distance recommendations
in the maintenance schedule.

Cleaning (Severe Conditions)

Clean the air cleaner element by

blowing compressed air through it in
the opposite direction to normal air
flow. If you do not have actcess to
compressed air (such as a service

station), ask your Acura dealer to do

this service.

Follow the replacement procedure

for removal and reinstallation.

CONTINUED

Maintenance

PIVOTS

LATCH

ASSEMBLY

NOTICE

Main Menu

Main Menu

Table of Contents

Advertising