Indicator lights – Acura 2000 RL - Owner's Manual User Manual
Page 57
Indicator Lights
Seat Belt Reminder Light
This indicator lights when you turn
the ignition switch ON (II). It is a
reminder to you and your passengers
to protect yourselves by fastening
the seat belts. A beeper also sounds
if you have not fastened your seat
belt.
If you do not fasten your seat belt,
the beeper will stop after a few
seconds but the light stays on until
you do. Both the light and the beeper
stay off if you fasten your seat belt
before turning on the ignition.
Low Oil Pressure
Indicator
The engine can be severely damaged
if this light flashes or stays on when
the engine is running. For complete
information, see page
Charging System
Indicator
If this light comes on when the
engine is running, the battery is not
being charged. For complete
information, see page
.
Parking Brake and Brake System
Indicator
This light has two functions:
1. It comes on when you turn the
ignition switch ON (II) as a
reminder to check the parking
brake. If the parking brake is not
set, it goes off after the engine
starts. If the parking brake is set,
it goes off when you release the
parking brake with the engine
running. Driving with the parking
brake applied can damage the
brakes and tires.
2. If it remains lit after you release
the parking brake while the engine
is running, or comes on while
driving, it can indicate a problem
in the brake system. For complete
information, see page
Instruments and Controls
U.S.
Canada
BRAKE
Main Menu
Main Menu
Table of Contents