Changing a flat tire – Acura 2000 RL - Owner's Manual User Manual
Page 275
Advertising
Changing a Flat Tire
6. Turn the jack's end bracket
counterclockwise to loosen it, then
remove the jack by lifting it
straight up.
7. Loosen the five wheel nuts 1/2
turn with the wheel wrench.
8. Locate the jacking point nearest
the tire you need to change. It is
pointed to by a mark molded
into the underside of the body.
Place the jack under the jacking
point. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch.
Taking Care of the Unexpected
JACK
JACKING
POINT
WHEEL WRENCH
Main Menu
Main Menu
Table of Contents
Advertising