Acura 2000 RL - Owner's Manual - Manual (Page 59)

Indicator Lights
Vehicle Stability Assist
(VSA) System Indicator
This indicator normally comes on for
a few seconds when you turn the
ignition switch ON (II).
If this light comes on and stays on at
any other time, or it does not come
on when you turn the ignition switch
ON (II), there is a problem with the
VSA system. Take the car to your
dealer to have it checked. Without
VSA, your car still has normal
driving ability, but will not have VSA
traction and stability enhancement.
See page
189 for more information
on the VSA system.
VSA Activation Indicator
This indicator has three functions:
1. It comes on as a reminder that you
have turned off the Vehicle
Stability Assist (VSA) system.
2. It flashes when VSA is active (see
page 189 ).
3. It comes on along with the VSA
system indicator if there is a
problem with the VSA system.
This indicator normally comes on for
a few seconds when you turn the
ignition switch ON (II). See page
189 for more information on the
VSA system.
Anti-lock Brake
System (ABS)
Indicator
This light normally comes on for a
few seconds when you turn the
ignition switch ON (II), and when
the ignition switch is turned to
START (III). If this light comes on at
any other time, there is a problem in
the ABS. If this happens, take the
car to your dealer to have it checked.
With the light on, your car still has
normal braking ability but no anti-
lock. For complete information, see
page
187 .
Instruments and Controls
VSA U.S. Canada
ABS
Main Menu
Main Menu Table of Contents