AERCO Modulex EXT 1530 - 3060 - Manual (Page 82)

MODULEX EXT 1530, 1912, 2295, 2677, 3060 Boilers
Installation, Operation & Maintenance Manual
5.1 Installation Menu: Initializing the E8 Controller
Each time power is applied to the boiler and the E8 controller cover (Figure 5-1) is opened, the
INSTALLATION Menu is displayed once (only). These values MUST be entered in order to
initialize the boiler for operation. Once the values grouped here have been entered and
accepted, the controller is initiated and operatable and may be configured for your boiler
installation. To re-enter the INSTALLATION menu, cycle the boiler power and open the cover
again.
To initialize the E8 Controller, set the following values in the
INSTALLATION Menu:
• Set the parameters: ENGLISH, HOUR, YEAR, MONTH, and DAY.
• Leave the BUS – ID HS parameter blank.
• Remaining parameters are already set and do not require any entry.
Figure 5-1: INSTALLATION Menu
WARNING
Menu selections shown are
the factory default settings.
Refer to GF-115-C for the
complete menu selections.
Page 82 of 138 AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913 OMM-0095_0E
12/01/14 Phone: 800-526-0288 GF-139