ALTANA Micro-Haze Plus - Manual (Page 23)

22
6.2 Changing the Language
The writing in the display of the
measurning unit can be selected to
be German, English, French or
Japanese (Katakana).
To change the language, insert the
measuring unit into the protective
holder and switch the unit on using
the mode button. By pressing the
mode button several times, skip
over the calibration and measuring
routines until one of the displays
shown in figure 6 appears.
Now activate the operate button
until the desired language version
is displayed.
Confirm by pressing the mode
button and skip over the routines
until the measurement modes
appear.
6 Program Description
Fig. 6: Changing the language
CHANGE LANGUAGE CHANGE LANGUAGE CHANGE LANGUAGE CHANGE LANGUAGE CHANGE LANGUAGE
-----> >> > >operate operate operate operate operate
AUTRES LANGUES AUTRES LANGUES AUTRES LANGUES AUTRES LANGUES AUTRES LANGUES
-----> >> > >operate operate operate operate operate
-----> >> > >operate operate operate operate operate
SPRACHE AENDERN SPRACHE AENDERN SPRACHE AENDERN SPRACHE AENDERN SPRACHE AENDERN
-----> >> > >operate operate operate operate operate
operate
operate
operate
operate