ALTANA Temp-Chart - Manual (Page 20)

19
Set Oven Specifications
• The Oven Name can be freely chosen
• Enter the speed of your oven in the Speed box.
If you fill in nothing or 0 m/s, the program will be
unable to show a distance axis.
• In the OvenStart box, please enter the time
your oven needs to reach the first „real“ zone. All
data values recorded before this point of time will
then appear on the time axis with a negative sign.
(Note: This offset can also be changed afterwards
by switching to the chart page and moving the
zero zone on the zone axis. Or, you can press the
right mouse button in the area of the temperature
curves and select the command Oven Offset in the
opening context menu.)
• To divide your measurement into Zones, please
additional lines to the zone list. Then, in the table,
enter the zone length as Duration. The zone tables
normally
only show the times, but if you have entered a
speed there, you can also enter the position and
length in meters.
If you want to delete a zone right click in the
number-column and select the desired command.