ALTANA Temp-Chart - Manual (Page 22)

21
Set Tolerance Curve
• By selecting None in the Smoothing option
box you can linearly link the defined reference
values. When you choose the options Yes or
More, however, help values will be created to
obtain as round a curve as possible.
There are two ways of creating reference values:
• Add additional lines to the list of reference
values; enter the position (At) and both limiting
values (Lower and Upper) in the table. Then,
the reference values will be shown in the chart.
• Move the cursor into the chart and drag it from
the upper to the lower limiting value while
pressing the mouse button. When releasing the
button, the program will insert a new reference
value.
In the chart, the reference values are indicated as
small circles; these circles can be moved with the
mouse in order to move the reference value.