ALTANA Temp-Chart User Manual
Page 7
6
1.1.2 Section QC Procedures
The section QC Procedures contains the following
commands:
Save as QC Allows to save the current settings
Procedure
(Oven, Tolerance curve, Curing
Conditions and Organizer) as a
named QC Procure. Please also
refer to the chapter How to Work
with QC Procedures as it contains
useful advice for an easy operation
of the program.
Apply QC
Apply a different QC
Procedure
Procedure to the currently
open measurement.
1.1.3 Section Oven/Zones
The section Oven/Zones allows to select a single
oven zone and contains the following commands:
Set Oven
Allows to adjust the position of the
oven start (with a time value of
0[s]).
Save Zoom Allows to save the currently visible
data into a new measurement
You can select zones, by opening the field with the
zones (1), or with the buttons in the header (2).
1.2 Menu View
The Commands in the View Tab of the Tools Menu
Menu View
1
2
2