ALTANA Temp-Chart - Manual (Page 31)

30
and a selection must be made. With “NO Confi-
guration” the Organizer which is already loaded
remains in the Instrument and the Data are sent
to the stick. If another Organizer is loaded, the
Data in the instrument are deleted after trans-
ferring to the USB.Stick.
• Remove the stick from the logger and connect it
to your PC
• In the temp-chart software
• Select the tab, fill in the connection choices and
press
Step 2:
There may be more than one measurement file on
the stick. Please select the appropriate file(s) and
then fill in the organizer information:
Note that this information is already filled in if the
device was prepared with temp-chart and the
used organizer does still exist.
As soon as you press Close the selected
measurement(s) is/are imported and opened in the
software.
Read Measurement Data