Operárm, Clock anü timer – Kenmore 911.93508 User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

OPERárm
Clock anü Timer

TO SBT THE CLOCK

|^

cuck

|

©

s

1. Touch the CLOCK pad

until display flashes.

2. Touch the HOUR/MIN UP

or DOWN arrow pads to

set the time of day.

3. Touch the CLOCK pad.

TOSET THE TmER

The Timer is used to time cooking

processes or other household

activities. It does not control the

oven. It can be set for up to 11 hours
and 59 minutes. It will count down in
minutes until the LAST 60 SECONDS
is reached, then the control will beep
once. When the countdown reaches
ZERO, the control will beep 3 times
followed by one beep every 6
seconds until the TIMER ON/OFF pad

is touched.

TIMER

OWOFF

1. Touch the TIMER ON/

OFF pad. “0:00" and the
“nMER indicator light will
flash.

2. Touch the HOUR/MIN UP

or DOWN arrow pads to

set the amount of time.

After releasing the arrow pad,
the TIMER indicator light will blink
three to five times. The countdown will
automatically begin. TTie TIMER

indicator light will remain on until

the countdown reaches "0."

When the timer has started the
countdown, you may touch the
CLOCK pad to return to the current
time of day.

At the end of the countdown, the
control will beep and the TIMER

indicator tight will flash. Touch the

TIMER ON/OFF pad.

REMfNDERI

If you hesitate while touching the
anrow pads, the display and the

TIMER indicator lights will blink 3

times and return the display to the

time-of-day clock. If this happens,

touch the TIMER ON/OFF pad to
start over.

TO RESET THE TIMER

If you decide to change your set time:

If the countdown is showing in the

display, touch the HOURMIN UP
or DOWN arrow pads. Select the

new time.

If the time-of-day clock is showing in
the display, touch the TIMER ON/OFF
pad. Then, touch the HOUR/MIN UP
or DOWN arrow pads. Select the
new time.

TO CANCEL THE TIMER

If the countdown is showing in the
display, simply change the time. If it
Isn’t, touch the TIMER ON/OFF pad,
then touch the TIMER ON/OFF pad to
cancel.

12

20P1836ENv01.pfii6

12

20400.0:34 AM

Advertising