Care amd cleammb, Removable parts (cent.), Care amd cleammb removable parts (cent.) – Kenmore 911.93508 User Manual

Page 26

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

CARE AMD CLEAmMB

Removable Parts (cent.)

REiyJO VABLEO VEN RA CKS

CLEANING MATERIALS
• Dishwashing detergent
• Warm water
• Scouring pad or soap-filled

steel-wool pad

Bump

REMO VABLEO VEN DOOR

TO REMOVE

1. Pull the racks out to the stop

position.

2. Pull up the front of the rack and

slide under the bump of the rack
guide.

TO CLEAN
Clean with warm water and detergent.
For hard-to-remove stains, gently
scrub with a scouring pad or a
soap-filled steel-wool pad. Rinse well.

TO REPLACE

1. Place the raised back of the rack

onto the rack guides.

2. Lift the front of the rack until the

raised back slides under the bump

of the rack guides.

3. Slide the rack all the way back.

TO REMOVE

1. Fully open the

door.

2

.

Push the hinge

locks down
toward the door
frame, to the
unlocked
position. This
may require a
flat-blade
screwdriver.

3. Firmly grasp both

sides of the door
at the top.

4

.

Close door to the

door removal
position.

5. Lift door up until

the hinge arm is
clear of the slot.

Hinge Leek

(UnlockBd

Poaltton)

Hinge Arm

Removal Position

TO REPLACE

1, Firmly grasp both

sides of the door
at the top.

2. With the door at

the same angle
as the removal

position, seat the
indentation of the
hinge arm into

the bottom edge of
the hinge slot.

Bottom
Edge of

Hinge
Arm

Indentation

26

20P1836ENv0l4)ni6

26

2a«D0,9dSAM

Advertising