Care and cleaning, Rib clear groove in stem spring clip – Kenmore 911.93508 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CARE AND CLEANING
• Dishwashing detergent
• Warm water
• Soft cloth
1. Be sure the control knob is in the
Pull straight off the stem. Using a
piece of string can make removing
the knob easier. Slip the string
under and around the knob,
pulling straight out.
Wash the knob thoroughly with
soapy water. Dry completely with
a soft cloth. DO NOT let the
1. Check the back of the knob.
The molded rib of the knob is
designed to fit perfectly onto the
3. Align the moided rib to the clear
groove in the knob stem. Push the
knob back as far as it will go.
THE OVEN LIGHT BULB
power to the oven at
the main circuit breaker
or fuse box before attempting to
replace the oven light bulb. Do
not touch a hot light bulb with
wet hands or a wet cloth. Wait
until the bulb has cooled and
use a dry cloth.
Hold your hand under the bulb
cover and firmly push back the bail
wire, until it clears and releases the
2. Unscrew the light bulb.
3. Replace the bulb with a
40-watt appliance bulb.
4. Place the bulb cover into the
grooves of the socket and puli the
bail wire forward until it rests in the
indentation on top of the bulb