Before cauinb for service – Kenmore 911.93508 User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
>-
BEFORE CAUiNB FOR SERVICE
PROBLEM
POSSIBLE CAUSE
POSSIBLE SOLUTION
Oven emits
odor.
a. Oven insulation may
emit odor during the
first few usages.
b. Failure to wipe out
excess soil.
a. Put oven through self-clean cycle
to speed up process of odor
“wearing off."
b. Wipe excess soil off before
using oven.
Oven door
accidentally
locked while
baking.
Do not force the lock
handle. Temperatures
above the locking
temperature will
prevent the lock handle
from sliding to the
unlock position.
Turn the control knob to the off
position. Allow the oven to cool until
the temperature inside drops below
the lock temperature and the handle
slides easily.
Cleaning
results were
poor.
a. Oven was heavily
soiled.
b. Clean cycle
interrupted.
a. Heavy spillovers should be
cleaned before the cycle is set.
b. Allow the oven to clean its full
cycle.
“F—and a
number or
latter” flash
in the display
You have a function
error code.
If a function error code appears
during the self-cleaning cycle, check
the oven door latch. The latch may
have been moved, even if only
slightly, from the locked position.
Make sure the latch is moved to the
right as far as it will go. Turn the oven
temperature control knob to OFF.
Allow the oven to cool for one hour.
Put the oven back into operation.
If the function code repeats,
disconnect all power to the range for
at least 30 seconds and then
reconnect power. If the function error
code repeats, call for service.
31
20f>1B36ENv01.piIl6
31
2/24/00,3:35 AM