Presser foot lifter, Thread cutter, Presser foot types – Kenmore 15358 User Manual
Page 20: Setting spool pins
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Setting Spool Pins
(i)
Spool pin
The spool pins are used for holding the spools of thread
when feeding the thread to the machine.
To use, pull up the spool pins. Push down for storage.
Presser Foot Lifter
0
Presser foot lifter
(2) Normal up position
@ Highest position
The presser foot lifter raises and lowers the presser foot.
You can raise it about 1/4” (0.6 cm) higher than the normal
up position for easy removal of the presser foot, or to help
place heavy fabric under the foot.
Thread Cutter
0 Thread cutter
You do not need a pair of scissors to cut threads after
sewing. Simply use the built-in thread cutter.
Advertising