Presser foot types, Automatic buttonhole foot, Hemmer foot – Kenmore 15358 User Manual
Page 24: Satin stitch foot, Presser foot lifter, Hemmer foot • satin stitch foot, Changing presser foot
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Changing Presser Foot
0)Lever
©Groove
(|)Pin
• To remove
Turn the handwheel toward you to raise the needle to its
highest position. Raise the presser foot.
Press the lever ©on the back of the foot holder. The
presser foot will drop off.
• To attach
Place the presser foot so that the pin ©on the foot lines
up directly below the groove ©of the foot holder.
Lower the foot holder to lock the foot in place.
Presser Foot Types
• Zigzag foot
Use this foot for both straight and
For:Straight stitch
Topstitching
Basic zigzag
Bar tacking
Button sewing
Overcasting stitch
Multiple zigzag stitch
Blind hem stitch
Lace work
Stretch stitch patterns
Knit stitch
Straight stretch stich
Box stitching
Twin needle stitches
zigzag stitching.
(page 36)
(page 38)
(page 44)
(page 48)
(page 48)
(page 50)
(page 50)
(page 52)
(page 52)
(page 54)
(page 56)
(page 56)
(page 58)
(page 62)
Automatic buttonhole foot
The size of buttonhole is automatically set by placing the
button in the automatic buttonhole foot.
For Buttonhole sewing
(page 64)
Zipper foot
The edge of the foot guides the zipper and keeps the
seam straight.
For:Zipper sewing
(page 38)
• Hemmer foot
This special foot is for sewing a roiled hem. The curl of
the foot helps to form a hem at a constant width.
For: Rolled hem sewing
(page 40)
Satin stitch foot
Use this foot for satin stitch and outlining applique.
For: Satin stitch
(page 44)
Monograming
(page 46)
Applique
(page 46)
Shell tuck
(page 54)
Smocking
(page 58)
Decorative satin stitch pattern (page 60)
12