Connecting antennas, Am loop antenna, Using external antennas – Pioneer VSX-D710S User Manual
Page 11: To improve fm reception, Fm wire antenna, Antenna snap connectors, Connecting your equipment
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting Your Equipment
Connecting Antennas
Connect the AM loop antenna and the FM wire antenna as shown below To improve reception and sound quality,
connect external antennas (see Using external antennas, below) Always make sure that the receiver is switched off
and unplugged from the wall outlet before making or changing any connections
'pcSSaS/bre'“
^csHraoi-Y’VIDEO •
I®«» I
#|HI
(OVD)
1
(CO)Q
COAX
'
OPT
----
ISI
(CO.R)g
OPT
El
OPT
VSX-D810S/D850S
AM loop antenna
Assemble the antenna and connect to the receiver
Attach to a wall, etc (if desired) and face in the
direction that gives the best reception
Using External Antennas
To improve FM reception
Connect an external FM antenna
FM wire antenna
Connect the FM wire antenna and fully extend vertically
along a window frame or other suitable area, etc
Antenna snap connectors
Twist the exposed wire strands together and insert into
the hole, then snap the connector shut
3/8 in (10mm)
To improve AM reception
Connect a 15-18 feet length of vinyl-coated wire to the AM
antenna terminal without disconnecting the supplied AM loop
antenna
For the best possible reception, suspend horizontally outdoors
11
En