Checking preset codes, Operating other pioneer components – Pioneer VSX-D710S User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Controlling the Rest of Your System
Checking Preset Codes
To check which preset code is associated with a MULTI
CONTROL button
VSX-D710S/D810S
1 Press SETUP and hold for three seconds
The LED on the remote control lights for two
seconds
2 Press the MULTI CONTROL button you
want to check the preset code for
3 Press and hold ENTER for two seconds
Each preset code consists of four digits, for example
1329 Each digit will be represented by a series of
blinks on the remote’s LED—3 blinks to represent
the digit “3”, etc (“0” is represented by 10 blinks )
VSX-D850S
1 Press and hold for three seconds the MULTI
CONTROL button you want to check the
preset code for
The preset code appears in the remote’s LCD display
Operating other Pioneer
Components
By connecting a control cord (optional), you can control
other Pioneer equipment using this remote control unit
Point the remote control unit towards the remote sensor
of this unit, even when operating other equipment
The remote control signals are received by the remote
sensor of this unit, and sent to the other devices via the
CONTROL OUT terminal
MEMO:
• You can also control Pioneer components by pointing
the receiver's remote control directly at the
component This type of operation does not require
control cords
40
En