Memo, Connecting your equipment – Pioneer VSX-D710S User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting Your Equipment
Connecting DVD 7.1 Channel (5.1 ch for VSX-D710S) Components
DVD and LD discs are compatible with both 2 channel and 7 1 channel audio output formats Connections can be
made from a DVD player/multi-channel decoder equipped with 7 1 analog outputs to the 6 1 analog inputs on this
unit (the surround back channel is mono on the VSX-D810S/D850S models so we refer to it as 6 1 ch) You need to
connect both the left and right surround back channels for the VSX-D810S/D850S models but the sound from this
channel will only be mono Always make sure that the receiver is switched off and unplugged from the wall outlet
before making or changing any connections
The arrows indicate the direction of the audio signai
VSX-D710S
DVD/muiti channei
decoder with 51 channei
anaiog output jacks
VSX-D810S/D850S
DVD/muiti channei
decoder with 7 1 channei
anaiog output jacks
MEMO:
• The 7 1 channel (5 1 channel for VSX-D710S) input can only be used when DVD 7 1 ch (5 1 channel for VSX-
D710S) input is selected
• For 6 1 channel output select the SB Ich setting (see p 20) In this case you can connect the single surround back
speaker to either the left or right surround back terminals
9
En