Pioneer VSX-D710S - Manual (Page 20)

Preparations
Component input 1 setting
Tells the receiver What (DVD player, etc) is connected to
this input
Optical digital input 1 setting
Here you tell the receiver what component you have
hooked up to the optical input jack 1
Press A or V to select the component setting
(DVD, TV, VCR or OFF)
MEMO:
• The initial setting is “DVD”
Press A or V to select the optical digital
input 1 (DVD, TV, CD, CD-R, VCR, or OFF)
After you assign a component to this digital jack
whenever you select that component, for example a
CD player, the receiver will automatically change to
the digital input setting You can see this in the
DIGITAI7ANALOG indicator on the front of the
Component input 2 setting
Tells the receiver What (TV player etc ) is connected to
this input
MEMO:
• The initial setting is “CD”.
20
En
Press A or V to select the component setting
(Ty VCR, OFF or DVD)
MEMO:
• The initial setting is “TV”
Multi Channel External Decoder
Surround Back 1ch/2ch setting (VSX-
D810S/VSX-D850S only)
You only need to make this setting if you are using a
multi channel external decoder with your DVD player If
you aren’t just ignore this setting
Press A or V to select the channel setting
Select Ich if your DVD is outputting 6 1
sound (the surround hack channel is mono)
or select 2ch if your DVD is outputting 7 1
sound (the surround back channel is stereo)
Coaxial digital input setting
Here you tell the receiver what component you have
hooked up to the coaxial digital input jack
Press A or V to select the coaxial digital
input (DVD, TV, CD, CD-R, VCR, or OFF)
After you assign the component to this digital jack
whenever you select that component, for example a
CD player, the receiver will automatically change to
the digital input setting You can see this in the
DIGITAL/ANALOG indicator on the front of the
receiver
MEMO:
• The initial setting is “DVD”.
Optical digital input 2 setting
Here you tell the receiver what component you have
hooked up to the optical input jack 2
Press A or V to select the optical digital
input 2 (DVD, Ty CD, CD-R, VCR, or OFF)
After you assign a component to this digital jack
whenever you select that component, for example a
CD player, the receiver will automatically change to
the digital input setting You can see this in the
DIGITAIVANALOG indicator on the front of the
receiver
MEMO:
• The initial setting is “CD-R”
Optical digital input 3 setting (VSX-
D810S/VSX-D850S only)
Here you tell the receiver what component you have
hooked up to the optical input jack 3
Press A or V to select the optical digital
input 2 (DVD, TV, CD, CD-R, VCR, or OFF)
After you assign a component to this digital jack,
whenever you select that component, for example a
CD player, the receiver will automatically change to
the digital input setting You can see this in the
DIGITAL/ANALOG indicator on the front of the
MEMO:
• The initial setting is “TV”.