Pioneer VSX-D710S - Manual (Page 24)

Displays & Controls
Remote Control
(VSX-D710S/D810S)
CD CD
MnMHT &1/7.1 ATT
CD (D CD
CD CD
DTVOTO MPKWTUm OACC^ OJDE ,
CD CD CD CD
BAM> cuas DTVOWPPF 0TVM6MJ
& ®
—iw ifcai we SHmseiECK
o o o o
24
En
® SOURCE (D button
Use to turn on/off other components connected to
the receiver
@ MULTI CONTROL buttons
Use to put the receiver/remote control in the stated
mode
For other equipment controls, see Controlling the
Rest of Your System on pages 35-49
@ RCV button (see page 16)
Use this button when setting up the surround sound
for the receiver Also press it if you want to use
special features attached to some of the number
buttons, for example MIDNIGHT, 5 1/7 1, or ATT
® NUMBER/MODE buttons
Use the number buttons to select the radio frequency
in tuner DIRECT ACCESS (see page 32) mode or the
tracks in CD, DVD mode etc
Also, buttons marked with the following names have
special functions If you try to use one of these
functions but the display flashes it means that
function cannot be used in the current mode (for
example DSP modes cannot be used when 5 1 Ch
setting is on)
MIDNIGHT (see page 31)
Use to put receiver in MIDNIGHT mode To use first
press the RCV button then operate this button
5 1 Ch (VSX-D710S) 7 ICh (VSX-D810S/D850S)
(see page 31)
When the DVD/LD or DVD 5 1/7 1 Ch function is
selected each press switches the DVD/LD input
between DVD/LD and DVD 5 1/7 1 Ch To use first
press the
RCV button then operate this button
ATT
When the overload indicator lights use this button to
attenuate (lower) the level of an analog input signal
and prevent distortion To use first press the
RCV
button then operate this button
EFFECT +/- buttons (see page 30)
Use to add or subtract the amount of effect in
different DSP sound modes (except 6 Ch Stereo) or
advanced listening modes
To use first press the
RCV button then operate these
buttons
) THE FOLLOWING BUTTONS ARE BOTH
CONTROLS FOR OTHER COMPONENTS (LIKE
A DVD PLAYER) AND DEDICATED TUNER
CONTROLS THE TUNER CONTROLS ARE
EXPLAINED HERE YOU CAN USE THEM
AFTER YOU HAVE PUSHED THE TUNER MULTI
CONTROL BUTTON
BAND button (see pages 32, 33)
Use to switch between the AM and FM band when in
TUNER mode
CLASS button (see pages 33)
Use to switch between the three banks (classes) of
station memories
MPX/RETURN button (see page 32)
Use to switch between auto stereo and mono
reception of FM broadcasts If the signal is weak then
switching to MONO will improve the sound quality
Also, this is the pause button for CDs, tapes, DVDs,
etc
D ACCESS button (see page 32)
Use to directly access a radio station by pressing the
number of the station you want
DTV INFO button
Use to bring up information screens on a digital TV
DTV MENU button
Use to bring up menus on a digital TV
DTV ON/OFF button
Use to turn a digital TV on/off
GUIDE button
Use to bring up the guides on a digital TV