R off” (receipt off) lamp status change operations, Receipt-issue/non-issue selection – Toshiba TEC MA-85-100 User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EOI-11072
)
15. Setting Preparation of Each Key and Transaction
Entries
This chapter describes individuai key operations on transaction entries, and
setting requirements for the key if necessary. {The samples for the operation
and setting are described in the receipt formats.)
Receipt-issue/Non-issue Selection
r
^
pj
\
(
log
/
receipt
Key)
Receipts are issued or not issued according to the “R OFF” triangular lamp illuminated/
extinguished status on the Operator Display panel.
)
“R OFF” (Receipt OFF) Lamp Status Change Operations
Control Lock may be in
any position except
OFF.
LOG
RECEIPT
Extinguished
Receipt ON
Status
LOG
RECEIPT
if-
Illuminated
Receipt OFF
Status
NOTES 1. The Control Lock may be in any position (except OFF position) for changing the
Receipt ON/OFF status in the signed-ON or signed~OFF condition.
2.
The “R OFF” lamp status at the starting of a transaction entry decides whether a
receipt will be issued for the transaction or not Switching the Receipt ON/OFF
status during a transaction will not be effective.
3.
If a transaction entered with the
"R
OFF” lamp extinguished and finalized but a
receipt is required, the [RECEIPT ISSUE]
{Posf-/sst;e
Receipt) key can be operated
to issue a receipt (see “Post-Issue Receipt” on page 68).
4.
Simply depress the [LOG/RECEIPT] key without a numeric entry. If the key is
depressed with a prior numeric entry in REG mode, it may turn out to be a Sign ON
or Sign OFF operation (refer to Chapter 18).
5.
This operation is effective only when the Receipt-format Option has been selected.
When the Journal-format Option has been selected, journal printing will occur
regardless of any “R OFF" lamp status.
-31 -