Electronic journal print (optional function), Programming requirements, Eiectronic journai report – Toshiba TEC MA-85-100 User Manual

Page 97: Operation, Reading of the remaining lines of e. j. memory, Eiectronic journai print (optionai function)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

EOl-11072

19. Electronic Journal Print (optional function)

Electronic Journal is a new state-of-the-art electronic feature that enables you

to generate a detailed record (journal) of your sales activity without using high

cost 2-ply paper. Via this feature the sales entries will be electronically stored

in the ECR memory instead of printing at the time of each sales entry.
(Up to 2750 lines can be stored in the electronic journal memory.)

Programming Requirements

1. Select the SET status (Electronic Journal Function Active) for System Option Address 11 -

Bits. (Refer to

Chapter 17.)

2. Select the statuses for other bits regarding Electronic Journal according to your request

(System Option Address 11 - Bits 6 to 8).

Eiectronic Journai Report

The electronically stored sales entries will automatically print out following the taking of the Daily

Financial Reset Report (initial setting). You can select to initiate printing of the Electronic Journal

via a manual operation.

Operation

Use MA Key.

X

REG

OFF

SET

The drawer does not open

&

1 1

AT/TL

Report

Print

Starts

Refer to the
Print Sample
Format on the

next page.

The contents of the E. J. buffer are

printed. After printing, ^e E. J. buffer
is cleared.

Reading of the Remaining Lines of E. J. Memory

This operation is used to display the remaining number of lines to be printed. The remaining
number of lines is displayed on the Amount portion of the display.

Operation

Use MA Key.

X

111

ST

The remaining number
of lines to be printed is

displayed on the

Amount portion.

NOTE:

When the remaining number of lines to be printed becomes 300 or less, the *‘ALM” lamp

illuminates after finalizing the current sale, (The alarm beeps according to the setting.)

When the buffer memory becomes full, a subsequent entry is prohibited and only the

^nalization operation is available.

- 0 7 -

Advertising
This manual is related to the following products: