Thank you call again – Toshiba TEC MA-85-100 User Manual
Page 86
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EOl-11072
NOTES 1. Any Bit No. shaded and filled with vacant in the Address tables on the
following pages will be disregarded even if it is SET or RESET. (However, if ever
SET, it will not result in an error.)
2. The Initial Status of each Bit is indicated by a dotted frame such as:
[_____ j
If you have never changed the Bit statuses in the Address before, the Initial Status
is active. Therefore, only the Bit status changes of the required Addresses may
be entered. If an All Memory Clear is operated (refer to Chapter ‘*23. Status
Clear artd Memory Clear Operations”), all the Bits in all the Address
automatically regain the Initial Status.
Programming Example) To select the following options:
Address 1 (refer to the next page)
Bit 1:
Time NON-PRINT (SET status)
Bit 2:
Purchased item Count NON-PRINT (SET status)
Other Bits are to be all RESET (PRINT)
Control Lock: SET
Thank you
Call again
0 0 1.2
0 8 - 5 3
- 8 6 -