Futaba 3PM-X 2.4GHz - Manual (Page 15)

15
Before Using
Transmitter T3PM-2.4G MX
Nomenclature
Throttle trim (DT2)
Edit keys
LCD screen
Pilot lamp
CH3 switch
( SW2)
(See page 16 for the operating
instructions.)
Steering dual rate
lever (DT3)
(See page 16 for the operating
instructions.)
ATL lever (DT4)
(See page 16 for the operating
instructions.)
Antenna
Power switch
Steering trim (DT1)
(See page 16 for the
operating instructions.)
Mechanical ATL
adjusting screw
(See page 17 for the
adjustment instructions.)
Steering wheel
Throttle
trigger
Grip Handle
Push switch (SW1)
*The switches and levers in the figure are shown in the initial setting position.
Precautions when turning the power switch on and off.
When the data is changed using the edit keys or trim levers, wait at least two
seconds before turning off the power. If the power is turned off within two
seconds after the data was changed, the new data will not be written to memory.
Never hold the antenna alone.
Hold the grip handle. Otherwise the antenna may be damaged.
Caution