Futaba 3PM-X 2.4GHz - Manual (Page 25)

25
Initial Set-Up
Preparations (Transmitter)
Before setting the transmitter functions, check and set items below.
Model number
Turn on the transmitter power.
Model name
(displayed for about one second)
1. Model Number Check
When the power switch is turned on, the current selected model number is displayed.
Check if this number is the model number you want to set-up. To change the model
number, use the Model Select function (page 50).
Signal mode
PP: PPM mode
HRS: HRS mode
Battery voltage
(Display when power switch is turned on)
2. Signal Mode Check
The T3PM-2.4G MX transmitter output signal format can be changed. (HRS/PPM)
Check if the signal mode is set to the desired mode.
If this setting is incorrect, change it with the HRS/PPM Select function (page 55).