Futaba 3PM-X 2.4GHz - Manual (Page 58)

58
Functions
Initiall value
DT1: 2
DT2: 2
DT3: 2
DT4: 2
Digital Trim Step / STP-DT
The digital trim (DT1/DT2/DT3/DT4) step amount can be adjusted by means of this
function.
Operation
-Adjustment range: 16 ranges of 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 20, 30, 40, 50, 3P, 2P
The larger the number, the larger the operation amount of 1 step. In the case of 3P, the
entire operating range operates at 3 points. In the case of 2P, the entire operating
range operates at 2 points.
Advice
When digital trim is used and the 3
rd
channel switch is operated
1. Set the vacant digital trims to the 3
rd
channel at the function select setup screen.
2. Select 3P or 2P using this digital trim step function. (3P: 3 position switch, 2P: 2
position switch)
Trim step adjustment
1
(Setup item selection)
Use the (CH) button to select the item to be set.
2
(Trim step adjustment)
Use the (+) or (-) button to adjust the trim step amount.
3
When ending adjustment, turn off the power switch before use.
Calling the setup screen
1. Turn on the power switch
while pressing "SEL" key.
2. Next, use "SEL"
key to select the
desired function
screen.
Press "CH" key to select the next set-
up screen.